Revit Multi-Trade From 0 to 100 - Full Intro This video series is based on a real project; one very close to my heart. It is the creation of existing conditions for various disciplines, including Architecture, Structural, Mechanical, Electrical and Plumbing. This is video 00.00 Revit Multi-Trade From 0 to 100 Full Intro. If you are watching this on YouTube, you might not be getting the full content. For full content, subscribe at https://www.bimitup.com I hope you enjoy and learn watching it as much as I did creating it. Good luck! Contact me: info@bimitup.com https://www.bimitup.com Buy me coffee: https://www.patreon.com/bePatron?u=57071418 https://paypal.me/bimitup I hope you love the products I recommend as much as I do. This content may contain affiliate links, which means I may receive a commission from purchases made through such links. As an Amazon Associate, I earn from qualifying purchases. The information provided in this video/website is provided in good faith and is intended for educational and discussion purposes only. You are solely and fully responsible for whatever you do with this information. In no event will BIMitUp be liable for any incidental, indirect, consequential, punitive or special damages of any kind, or any other damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, loss of reputation, goodwill, data, information, income, anticipated savings or business relationships, whether or not BIMitUp has been advised of the possibility of such damage, arising out of or in connection with the use of this information or any referenced videos, documents, websites or information. Other links: https://www.bimitup.com https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ https://www.ashrae.org/ Music: OutroMusic - Smoke Jacket Blues - TrackTribe #Revit, #Course, #From0to100, #Howto, #Video, #Tutorial, #Explained, #BIM, #MEP, #Design, #Training, #LearnRevit,

Continuing with our Revit Multi-trade from 0 to 100 series, in this video I will show you how to create a gutter downspout in Revit. First, I will give you an overview on downspout components, then I will show you how to modify the gutter family in Revit, and then we will create our own gutter downspout using a very creative approach. Contact me: info@bimitup.com https://www.bimitup.com Buy me coffee: https://www.patreon.com/bePatron?u=57071418 https://paypal.me/bimitup I hope you love the products I recommend as much as I do. This content may contain affiliate links, which means I may receive a commission from purchases made through such links. As an Amazon Associate, I earn from qualifying purchases. The information provided in this video/website is provided in good faith and is intended for educational and discussion purposes only. You are solely and fully responsible for whatever you do with this information. In no event will BIMitUp be liable for any incidental, indirect, consequential, punitive or special damages of any kind, or any other damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, loss of reputation, goodwill, data, information, income, anticipated savings or business relationships, whether or not BIMitUp has been advised of the possibility of such damage, arising out of or in connection with the use of this information or any referenced videos, documents, websites or information. Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ https://www.ashrae.org/ Music: OutroMusic - Smoke Jacket Blues - TrackTribe #Revit, #Course, #Multitrade, #From0to100, #Howto, #Gutter, #Downspout, #Video, #Tutorial, #Lesson, #Explained, #BIM, #MEP, #Design, #Training, #LearnRevit, #Model, #Tips, #Tricks, #Autodesk, #BIMitUp, #AlexanderSol, #Architecture, #Building, #Simple, #helpful

In this video tutorial, I will show you what I consider the best way to model a sink. Revit Plumbing and Fire Protection Template: https://www.bimitup.com/product-page/ajs-revit-plumbing-template Contact me: info@bimitup.com https://www.bimitup.com Buy me coffee: https://www.patreon.com/bePatron?u=57071418 https://paypal.me/bimitup I hope you love the products I recommend as much as I do. This content may contain affiliate links, which means I may receive a commission from purchases made through such links. As an Amazon Associate, I earn from qualifying purchases. The information provided in this video/website is provided in good faith and is intended for educational and discussion purposes only. You are solely and fully responsible for whatever you do with this information. In no event will BIMitUp be liable for any incidental, indirect, consequential, punitive or special damages of any kind, or any other damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, loss of reputation, goodwill, data, information, income, anticipated savings or business relationships, whether or not BIMitUp has been advised of the possibility of such damage, arising out of or in connection with the use of this information or any referenced videos, documents, websites or information. Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ https://www.ashrae.org/ Music: OutroMusic - Smoke Jacket Blues - TrackTribe #Revit, #sink, #modeling, #piping,#Howto,#Video,#Tutorial, #Explained, #BIM, #MEP, #Design, #Training,#LearnRevit, #Model, #Tips, #Tricks, #Plumbing, #Autodesk,#BIMitUp, #AlexanderSol, #Building, #Simple, #helpful

Continuing with our Revit Multi-Trade from 0 to 100 series, In this video tutorial, I will give you an introduction to the Plumbing module of the course Contact me: info@bimitup.com https://www.bimitup.com Buy me coffee: https://www.patreon.com/bePatron?u=57071418 https://paypal.me/bimitup I hope you love the products I recommend as much as I do. This content may contain affiliate links, which means I may receive a commission from purchases made through such links. As an Amazon Associate, I earn from qualifying purchases. The information provided in this video/website is provided in good faith and is intended for educational and discussion purposes only. You are solely and fully responsible for whatever you do with this information. In no event will BIMitUp be liable for any incidental, indirect, consequential, punitive or special damages of any kind, or any other damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, loss of reputation, goodwill, data, information, income, anticipated savings or business relationships, whether or not BIMitUp has been advised of the possibility of such damage, arising out of or in connection with the use of this information or any referenced videos, documents, websites or information. Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ https://www.ashrae.org/ Music: OutroMusic - Smoke Jacket Blues - TrackTribe #Revit, #Howto, #Plumbing,#Introduction, #Video,#Tutorial,#Explained, #BIM, #MEP,#Design,#Training,#LearnRevit,#Model,#Tips,#Tricks,#Plumbing, #Piping, #Autodesk,#BIMitUp,#AlexanderSol,#Architecture, #Building, #Simple, #helpful, #youtube

In this video tutorial, I will explain to you Central Models in Revit MEP. Detailed Video Content: Central Models in Revit MEP, local model, synchronize with central Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Central, #Local, #Model, #difference, #Synchronize, #sync, #Revit, #MEP#Howto, #collaborate, #worksets, #Training, #Explained, #Tutorial, #LearnRevitFast, #BIM, #Autodesk Links to Other Videos: How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU www.autodesk.com

In this video tutorial, I will show you How to Calculate and Size Domestic Water Systems in Revit MEP. Detailed Video Content: • Intro: (0:00) • Domestic Water System Setup Explanation: (1:22) • FUs vs GPM: (2:22) • How Revit Calculates GPM: (2:45) • International Plumbing Code: (3:34) • Diversity and Hunter’s Curve: (4:27) • More on how Revit Calculation and Sizing (5:08) • More on the software validation (6:51) • Sizing Domestic Water Pipe using Revit (7:58) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Revit, #MEP, #Howto, #Training, #Tutorial, #LearnRevitFast, #Plumbing, #calculate,#domestic,#water,#systems,#sizing,#hunter, #BIM, #BIMitUp, #Autodesk www.bimitup.com www.aspe.org

In this video tutorial, I will show you How to Create and Modify Keynotes and Keynote Schedules in Revit. Detailed content: • Introduction: (0:00) • Element Keynotes: (2:30) • Type Family Keynotes vs “Flexing” Family Keynote: (4:15) • Using keynotes per “Revit Ideal World” specs: (8:30) • Keynote Schedules (Legend): (10:45) • Keynote Fire Format/Organization: (16:45) • Keynote Schedule Settings: (18:15) • Edit a Keynote Symbol: (19:05) • User Keynotes: (21:20) • More Schedule Formatting: (27:30) • Tagging an Isometric: (28:30) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Revit,#Keynotes,#Schedules,#MEP,#Training,#BIM, #Mechanical, #Electrical, #Plumbing, #Fire Protection, #BIMitUp, #tutorial Links to Other Videos: How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU

In this video tutorial, I will give you an introduction to Revit MEP. Detailed Content: • Intro to BIM: (0:00) • Overview of creating a new model • A good advice (Learn like a child) • What is Revit and how it works • Main differences between Revit and CAD • Revit capabilities • Overview of the Revit user interface • Project Browser, views, families, parameters, links • Next steps Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Introduction, #Revit, #Beginner, #MEP, #Basics, #What, #Project, #Browser, #Howto, #Training, #BIM, #Autodesk, #BIMitUp, #RevitMEP101, #Tutorial, #LearnRevitFast Links to Other Videos: How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Split Pipes in Revit MEP https://youtu.be/OKHkeCkRea4 How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw Sprinkler Arm-Over in Revit (Return Bend) https://youtu.be/NdxkhxAEp0w Sprinklers Decoded #1 - Standard Coverage Fire Sprinkler - Spacing, Area https://youtu.be/0csylWxmR4Q How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 How to Create Pipe Systems in Revit MEP https://youtu.be/qJ4Df_4SbRg Time-Saving Tips and Tricks for Piping in Revit #1 https://youtu.be/CEx2DILUdJI How to Create a Plumbing Stack in Revit https://youtu.be/Bk33ARXwPqc Revit Groups and Assemblies - Part 1 Groups https://youtu.be/co-jBPbNwmI How to Create Plumbing Isometrics in Revit https://youtu.be/o1BGz2TryPA Music: https://www.bensound.com

In this video tutorial, I will show you How to create a new HVAC project in Revit MEP. Specifically, I will show you: Intro: (0:00) How to Create a New Project from a Template: (1:00) How to Link the Architectural Model: (1:30) How to Create and align Levels: (2:53) How to Copy Monitor Levels (different methods): (5:30) How to create new floor plans: (9:21) How to create new ceiling plans: (10:08) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #HVAC, #Revit MEP, #New, #Project, #model, #Copy Monitor, #Floor Plans, #Ceiling Plans

In this video tutorial, I will show you How to create a new Plumbing project in Revit MEP. Specifically, I will show you: • Intro: (0:00) • How to Create a New Project from a Template: (0:40) • How to Link the Architectural Model: (1:16) • How to Identify and Align Levels: (2:40) • How to Copy Monitor Levels (different methods): (4:08) • How to create new floor plans: (8:00) • How to create new ceiling plans: (10:05) Links to Other Videos: How to Create a New HVAC Project in Revit MEP: https://youtu.be/VMrn-2kJAPo Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Revit MEP, #Training, #Tutorial, #Create new Project, #Plumbing, #Link model, #Create levels, #Copy monitor, #BIM, #Create new floor plans, #Create new ceiling plans

This is part A of a 2-Part series. Stay tuned for Part B! Description/Content: In this video tutorial, I will show you How to create a piping family in Revit MEP. For that, we build a grease interceptor from scratch and add piping connectors to it. Part A - Detailed content: Introduction: (0:00) Grease trap Intro: (2:14) Creating the family - Creating Reference Planes: (5:07) Creating the family - Dimensions and constraints: (7:37) Creating the family - Creating the extrusion: (7:25) Part B – Detailed Content Introduction: (0:00) Creating the Family - Creating the extrusion (0:38) Creating the Family – Adding piping extrusions (5:21) Creating the Family – Adding piping connectors (13:40) Importing the new family into a project: (15:30) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductil Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Music: https://www.bensound.com

This is part B of a 2-Part series. If you haven't, go watch Part A first. Description/Content: In this video tutorial, I will show you How to create a piping family in Revit MEP. For that, we build a grease interceptor from scratch and add piping connectors to it. Part A - Detailed content: Introduction: (0:00) Grease trap Intro: (2:14) Creating the family - Creating Reference Planes: (5:07) Creating the family - Dimensions and constraints: (7:37) Creating the family - Creating the extrusion: (7:25) Part B – Detailed Content Introduction: (0:00) Creating the Family - Creating the extrusion (0:38) Creating the Family – Adding piping extrusions (5:21) Creating the Family – Adding piping connectors (13:40) Importing the new family into a project: (15:30) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductil Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Music: https://www.bensound.com

Plumbing Isometrics – Solving “Hide Pipes Behind” In this video, I will show you how we can solve, as a Plumbing design community, the problem of “hiding pipes behind” on a plumbing isometric, in Revit. Link to Vote: (make sure you are logged into your Autodesk account) https://forums.autodesk.com/t5/revit-ideas/revit-mep-2016-plumbing-isometrics/idi-p/7441125 Come on. We can do this…Together! Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Revit, #MEP, #How to, #Plumbing, #Isometrics, #Hide pipes behind, #BIM, #Autodesk Music: https://www.bensound.com

Description/Content: In this video tutorial, I will show you How to Create Pipe Systems in Revit MEP. Particularly, I will show you: • Introduction: (0:00) • Pipe Types vs Pipe Systems: (1:00) • Creating the new project: (3:46) • Revit pipe systems characteristics: (4:40) • Pipe system classifications: (5:10) • Pipe system type properties: (6:42) • Working with Pipe systems: (9:26) • Creating a new pipe system - Duplicating: (10:04) • Pipe system graphic overrides - Line types: (10:34) • Pipe system abbreviation: (12:09) • Creating a storm drainage system: (1:40) • Closing: (17:45) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Music: https://www.bensound.com #HowTo, #Create, #Pipe Systems, #Revit, #MEP, #Creating, #Duplicating, #GraphicOverride, #abbreviation, #tags, #Piping, #Training, #Pipe Type, #Routing Preference, #BIM, #Plumbing, #Mechanical, #Tutorial, #BIMitUp, #Autodesk

Title: How to Create Plumbing Isometrics in Revit In this video tutorial, I will show you How to create plumbing isometrics in Revit MEP. Particularly, I will show you: • Intro: (0:00) • How to create a plan callout: (0:38) • How to orient 3D to a plan view: (1:08) • How to create a water isometric: (1:30) • How to create a sanitary drain isometric: (1:50) • Final product: (2:30) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Template: https://www.bimitup.com/product-page/ajs-revit-plumbing-template Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Howto, #Create, #Plumbing, #Isometrics, #Revit, #MEP, #Training, #Piping, #Pipe, #MultipleRestrooms, #GroupRestrooms, #Callouts, #RoutingPreference, #PipeType, #BIM, #BIMitUp, #Autodesk

In this video tutorial, I will show you How to Create a Sanitary Drain Pipe Type in Revit MEP (PVC). Particularly, I will show you: • How to access pipe types or routing preferences: (0:40) • How to select fittings for your pipe types: • How to create a new pipe type • How to constrain fitting selection only to your routing preferences Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP (Threaded Routing Preferences): https://youtu.be/w1LbRmzhJyM How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection Routing Preferences) https://youtu.be/5GzTI34md-A Music: https://www.bensound.com #Revit MEP, #How to, #Training, #Tutorial, #Piping, #Pipe Type, #Routing Preference, #BIM, #PVC, #Sanitary, #Drain, #Drainage, #DWV

Title: How to Create Pipe Tags in Revit Tutorial In this video, I will show you How to Create Pipe Tags in Revit MEP • Intro: (0:00) • Setting up: (1:32) • Generic Annotations (1:57) • Labels and Family Categories (2:14) • Adding parameters to a label (2:58) • Align with component: (5:10) • Example of a complex pipe tag: (6:45) • “Up” Pipe tag: (8:07) • “Comment” Pipe tag: (10:05) • “Multi” Tag (for Patreon): (12:40) • “Isometric Pipe-hide” preview: (12:57) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Tags: #Revit, #MEP, #Howto, #Create, #PipeTag, #Training, #Plumbing, #Fire Protection, #Piping, #Annotations, #BIM, #Autodesk, #HVAC Links to Other Videos: Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Split Pipes in Revit MEP https://youtu.be/OKHkeCkRea4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw Sprinkler Arm-Over in Revit (Return Bend) https://youtu.be/NdxkhxAEp0w Sprinklers Decoded #1 - Standard Coverage Fire Sprinkler - Spacing, Area https://youtu.be/0csylWxmR4Q How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 How to Create Pipe Systems in Revit MEP https://youtu.be/qJ4Df_4SbRg Time-Saving Tips and Tricks for Piping in Revit #1 https://youtu.be/CEx2DILUdJI How to Create a Plumbing Stack in Revit https://youtu.be/Bk33ARXwPqc Revit Groups and Assemblies - Part 1 Groups https://youtu.be/co-jBPbNwmI How to Create Plumbing Isometrics in Revit https://youtu.be/o1BGz2TryPA Music: https://www.bensound.com

Description/Content: In this video tutorial, I will show you How to create a multiple pipe tag in Revit MEP. For that, we need to know: Intro: (0:00) How to create multiple labels: (0:58) How to create multiple types: (4:07) How to create multiple parameters: (4:44) How to associate yes/no parameters to different types: (5:44) How to associate yes/no parameters to visibility of labels: (6:16) Loading into project: (7:25) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Tags: #Revit, #MEP, #Howto, #Multiple, #PipeTag, #Training, #Plumbing, #FireProtection, #Piping, #BIM, #Autodesk, #HVAC, #tutorial Links to Other Videos: How to Create Pipe Tags in Revit: https://youtu.be/Oah-lT5eNZc Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductil Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Split Pipes in Revit MEP https://youtu.be/OKHkeCkRea4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw Sprinkler Arm-Over in Revit (Return Bend) https://youtu.be/NdxkhxAEp0w Sprinklers Decoded #1 - Standard Coverage Fire Sprinkler - Spacing, Area https://youtu.be/0csylWxmR4Q How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 How to Create Pipe Systems in Revit MEP https://youtu.be/qJ4Df_4SbRg Time-Saving Tips and Tricks for Piping in Revit #1 https://youtu.be/CEx2DILUdJI How to Create a Plumbing Stack in Revit https://youtu.be/Bk33ARXwPqc Revit Groups and Assemblies - Part 1 Groups https://youtu.be/co-jBPbNwmI How to Create Plumbing Isometrics in Revit https://youtu.be/o1BGz2TryPA Music: https://www.bensound.com

How to Convert Details from CAD to Revit Tutorial Description/Content: In this video, I will show you How to import Detail from AutoCAD into Revit Particularly, I will show you: • Intro: (0:00) • Preparing the AutoCAD detail: (0:40) • Preparing to import the detail: (3:26) • Text tips: (6:38) • CAD to Revit tips: (8:20) • Importing detail from CAD to Revit (8:42) • Final touchups (9:50) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Split Pipes in Revit MEP https://youtu.be/OKHkeCkRea4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw Sprinkler Arm-Over in Revit (Return Bend) https://youtu.be/NdxkhxAEp0w Sprinklers Decoded #1 - Standard Coverage Fire Sprinkler - Spacing, Area https://youtu.be/0csylWxmR4Q How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 How to Create Pipe Systems in Revit MEP https://youtu.be/qJ4Df_4SbRg Time-Saving Tips and Tricks for Piping in Revit #1 https://youtu.be/CEx2DILUdJI How to Create a Plumbing Stack in Revit https://youtu.be/Bk33ARXwPqc Revit Groups and Assemblies - Part 1 Groups https://youtu.be/co-jBPbNwmI Music: https://www.bensound.com #How to, #Import, #Detail#from#CADtoRevit, #Training, #BIM, #Autodesk, #Revit, #MEP

In this video tutorial, I will show you How to hide the pipe behind using a masking pipe tag in Revit. Introduction: (0:00) Setup: (0:56) Creating the Tag - Part 1: (4:38) BIMitUp Patreon: (5:30) Creating the Tag - Part 2 (9:35) The isometric pipe hiding Tag, can be downloaded from the link below: https://www.bimitup.com/product-page/ajs-tag-pipetag-isometric-hide-break Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com #Howto, #hide, #pipe, #behind, #Revit, #isometric, #3D, #1-line, #Tag, #Pipe-Hiding, #cut, #MEP, #Training, #Plumbing, #Fire Protection, #Piping, #BIM, #Autodesk, #HVAC Links to Other Videos: Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductil Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Split Pipes in Revit MEP https://youtu.be/OKHkeCkRea4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw Sprinkler Arm-Over in Revit (Return Bend) https://youtu.be/NdxkhxAEp0w Sprinklers Decoded #1 - Standard Coverage Fire Sprinkler - Spacing, Area https://youtu.be/0csylWxmR4Q How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 How to Create Pipe Systems in Revit MEP https://youtu.be/qJ4Df_4SbRg Time-Saving Tips and Tricks for Piping in Revit #1 https://youtu.be/CEx2DILUdJI How to Create a Plumbing Stack in Revit https://youtu.be/Bk33ARXwPqc Revit Groups and Assemblies - Part 1 Groups https://youtu.be/co-jBPbNwmI How to Create Plumbing Isometrics in Revit https://youtu.be/o1BGz2TryPA Music: https://www.bensound.com

In this video tutorial, I will show you How to properly create a group in Revit MEP. Particularly, I will show you: • How to pipe sanitary drainage to a lavatory (0:00) • How to pipe domestic water to a lavatory (2:40) • How to create a group in Revit (4:20) • Properties of Revit groups • How to ungroup groups in Revit (5:23) • How to edit a group in Revit (5:33) • How to copy groups in Revit (6:12) • How to modify groups in Revit (6:50) • How to ungroup groups in Revit (7:20) • Some modifications… • Connecting piping to groups…now works! (good job Autodesk) (12:12) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Patreon: https://www.patreon.com/bePatron?u=57071418 Links to Other Videos: How to create a plumbing stack in Revit: https://youtu.be/Bk33ARXwPqc Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Music: https://www.bensound.com #Howto, #Create, #Groups, #Revit, #MEP, #Plumbing, #Autodesk, #Training, #Piping, #PipeType, #RoutingPreference, #BIM, #BIMitUp, #Autodesk

In this video tutorial, I will show you How to Create a Plumbing Stack in Revit Particularly, I will show you: • Intro: (0:00) • Setting up the Background: (1:22) • Dropping Plumbing Fixtures: (2:11) • Creating the Plumbing Stack: (5:38) • Detailed information on Plumbing Stacks: (10:33) Further info: - Visibility graphics (VG or VV). You can change fixtures to Green or any color you prefer. - Some lavatory manufactures offering BIM content: Zurn, Kohler, American Standards, Autodesk - FBC - Chapter 6 Plumbing Elements and Facilities: Max height 34” (rim), knee space 29”, etc. - Tail piece: Max distance from the sink drain to the entrance of P-trap is 24” Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc Time-Saving Tips and Tricks for Piping in Revit #1 (Ptraps) https://youtu.be/CEx2DILUdJI Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 For more head to: www.bimitup.com Music: https://www.bensound.com Tags: #Howto, #Create, #Plumbing, #Stack, #Revit, #MEP, #P-trap, #Training, #Piping, #PipeType, #BIM, #Autodesk, #BIMitUp, #Easy, #Amazing

In this video tutorial, I will show you a couple of great time-saving tips and tricks for piping in Revit MEP. Particularly, I will show you: • Intro: (0:00) • End Product: (1:27) • Understanding fitting swapping: (2:25) • Swapping an elbow for a p-trap: (3:02) • How to change a p-trap into an elbow: (3:27) • Assigning a P-trap as an elbow under pipe types: (4:47) • Changing an elbow for a p-trap - Using it: (5:20) • P-trap tricks: Orientation, slopes and trim direction: (5:54) • Revit sanitary tees Intro: (8:36) • Come out at 90° or 45° without changing the pipe type: (9:54) • Understanding the sanitary tee (angle parameter): (11:20) • Understanding the elbow (angle parameter): (12:13) • Changing a tee for a Sanitary Wye: (12:40) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Music: https://www.bensound.com #Revit, #MEP, #Piping, #Tips, #Tricks, #video, #tutorial, #Training, #PipeType, #RoutingPreference, #BIM, #Autodesk, #BIMitUp

In this video tutorial, I will show you How to Create Spaces in Revit MEP Particularly I will show you: • How to create a new space: (0:00) • How to assign a space types to a space: (0:40) • How to create new space types: (0:50) • How to create a space schedule: (1:18) • How to delete spaces: (2:44) • How to name spaces to match the Architect’s rooms: (4:05) • How to create and tag several spaces at once: (6:40) • How to use the space naming tool: (7:40) • Space boundaries: (8:25) • How to separate spaces: (9:40) • Space tags: Area and volume: (11:15) • How to set space area and volume calculations (Computations): (11:55) • Assign space types efficiently: (12:50) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Patreon: https://www.patreon.com/bePatron?u=57071418 #Revit MEP, #Training, #Spaces, #Tutorial, #BIM, #How to

In this video tutorial, I will show you How to Draw Ductwork in Revit MEP. Particularly, I will show you: • Intro (0:00) • How to add diffusers and specify flow: (1:50) • How to add hard ductwork: (6:15) • How to add flexible ductwork: (10:30) • How to add balancing dampers: (11:55) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Note: The purpose of this video is to roughly show how to import, place and assign CFM to diffusers, only so that we are able to create and connect ductwork (main topic). The purpose of the video is NOT to go in detail on how to locate diffusers in reference to walls and other ceiling components (if you are interested on that, post in the comments and I will create) Links to Other Videos: How to Create an HVAC Project https://youtu.be/VMrn-2kJAPo Music: https://www.bensound.com #Draw Ductwork, #create ductwork, #design ductwork, #HVAC, #add diffusers, #Revit MEP, #Training, #Ductwork, #hard, #flexible, #balancing dampers, #Tutorial

In this video tutorial, I will show you How to Size Ductwork in Revit MEP Note: In this example we are going very liberal to be as cost effective as possible; but good practice is to comply with BOTH not exceeding your maximum pressure drop AND not exceeding your maximum velocity. Particularly, I will show you: Intro: (0:00) Recap of previous video: (1:00) Assigning CFM to diffusers: (1:15) Basics on ductwork sizing: (1:34) How to Size Ductwork Using Revit MEP: (3:40) System Inspector: (10:38) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Related Videos: How to Create a New HVAC Project in Revit MEP: https://youtu.be/VMrn-2kJAPo How to Draw Ductwork in Revit MEP: https://youtu.be/_lOwIk_Q11s #How to, #Size Ductwork, #Revit MEP, #Training, #BIM, #HVAC, #System Inspector, #Tutorial Music: https://www.bensound.com

In this video tutorial, I will show you How to Transfer Project Standards In Revit MEP MEP. Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a Grooved and Threaded Pipe Type in Revit MEP - Steel - Fire Protection https://youtu.be/5GzTI34md-A Music: https://www.bensound.com #Transfer, #Project, #Standards, #Tutorial, #Revit, #Training, #BIM, #BIMitUP

In this video tutorial, I explain sprinkler coverage and show you How to space fire sprinklers in accordance to NFPA13. We also do a couple of examples in Revit MEP (Light Hazard and Ordinary Hazard). • Intro: (0:00) • Theory Basis (Code – NFPA 13): (1:45) • Placing the sprinklers: (6:05) • Future Topics: (18:28) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a Fire Pump Room in Revit MEP (LIVE): https://youtu.be/HxN2SVbE2z8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A Sprinkler Arm-Over in Revit (Return Bend): https://youtu.be/NdxkhxAEp0w Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Contact: info@bimitup.com For more head to: www.bimitup.com Music: https://www.bensound.com #Fire, #Sprinklers, #Spacing, #Coverage, #Area, #Fire #Protection, #NFPA13, #Revit #MEP, #Training, #Piping, #BIM, #Tutorial

Sprinkler Arm-Over in Revit (Return Bend) In this video tutorial, I will train you on Sprinkler Arm-Overs and how to create sprinkler arm-overs in Revit. Specifically, I will show you: Intro and Supporting info: (0:00) How to setup project, load sprinklers and how to locate sprinklers: (2:19) How to create the sprinkler main and branch: (7:30) How to create a sprinkler arm-over in Revit: (8:05) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Patreon: https://www.patreon.com/bePatron?u=57071418 #Sprinkler, #Arm-Over, #Howto, #Revit, #MEP, #Piping, #Pipe#Type, #Routing#Preference, #Training, #BIM, #Fire#Protection, #Threaded Links to Other Videos: How to Create a Threaded Pipe Type in Revit MEP https://youtu.be/w1LbRmzhJyM How to Create a Grooved and Threaded Pipe Type in Revit MEP (Steel - Fire Protection) https://youtu.be/5GzTI34md-A Introduction to Pipe Types in Revit MEP - Routing Preferences: https://youtu.be/58ruPxf5eoo How to Create a Flanged Pipe Type in Revit MEP (Flanged Routing Preferences) https://youtu.be/Nak-wzUpPEw How to Create a Sanitary Drainage Pipe Type in Revit MEP (Glued PVC Routing Preference) https://youtu.be/z_0AlvuBaDc How to Create a Mechanical Joint Pipe Type in Revit MEP (Ductile Iron Routing Preferences) https://youtu.be/33JP-h_E5v4 How to Create a New HVAC Project in Revit MEP https://youtu.be/VMrn-2kJAPo How to Create a New Plumbing Project in Revit MEP https://youtu.be/T0sAza5HmvM How to Create Spaces in Revit MEP https://youtu.be/4mccdrl4Wi8 How to Pipe Fire Sprinklers in Revit MEP https://youtu.be/d-WqbWAh-Bw How to Transfer Project Standards in Revit MEP https://youtu.be/fh3uZFcIdHU How to Draw Ductwork in Revit MEP https://youtu.be/_lOwIk_Q11s How to Size Ductwork in Revit MEP https://youtu.be/LeEEaGbNY2k How to Create a Fire Pump Room in Revit MEP https://youtu.be/HxN2SVbE2z8 Music: https://www.bensound.com

In this video tutorial, I will show you How to Pipe Fire Sprinklers in Revit MEP. Particularly, I will show you: Intro: (0:00) Intro: (0:00) How to place fire sprinklers in Revit MEP: (0:35) How to transfer project standards in Revit MEP: (3:05) How to Pipe Fire Sprinklers in Revit MEP (4:26) Contact me: info@bimitup.com https://www.bimitup.com https://www.patreon.com/bePatron?u=57071418 Other links: https://www.autodesk.com https://www.aia.org https://www.aspe.org https://www.nfpa.org/ Music: https://www.bensound.com Links to Other Videos: How to Create a Grooved and Threaded Pipe Type in Revit MEP - Steel - Fire Protection: https://youtu.be/5GzTI34md-A Music: https://www.bensound.com #How to, #Pipe, #Fire Sprinklers, #Revit MEP, #Training, #Pipe Type, #Routing Preference, #BIM, #Fire Protection, #Grooved and Threaded, #Tutorial